Battery Types:   Automotive   Chargers   Commercial   Marine   Motive Power   Motorcycle   Security   Stationary   TelcomBatteries   UPS Batteries

Installation and maintenance programs are available with custom cabling, racking or cabinets along with chargers, inverters and power boards.

Electro Battery is the complete source
for all your battery needs!

230 West Parkway US · Pompton Plains, NJ 07444
Phone: 973-835-3334. Fax: 973-835-2332
email address: info@electrobattery.com

< Back to the UPS Battery main page | Upgrade to MAXRATE™ -12-300 Premium Plus

UPS12-270
Valve Regulated Lead Acid Battery
for UPS standby power applications
12V 75 AH @ 20 hr rate,
12V 282 watts/cell @ 15 min. rate

FEATURES

• Flame-arresting one-way pressure-relief vent for safety and long life.
• Thermally welded case-to-cover bond to eliminate leakage.
• Absorbent Glass Mat (AGM) technology for efficient gas recombination of up to 99% and freedom from electrolyte maintenance.
• Computer-generated grid design optimized for high power density.
• UL-recognized component.
• Multicell design for economy of installation and maintenance.
• Can be mounted in any orientation.
• Not restricted for air transport – Complies with IATA/ICAO Special Provision A67.
• Not restricted for surface transport – Classified as non-hazardous material as related to DOT-CFR Title 49 parts 171-189.
• Computer designed lead, low calcium alloy grid for minimal gassing and ease of recycling.
• Case and cover available in both standard and flame retardant polypropylene.
• Flame retardant polypropylene case and cover compliant with UL 1778 (optional).

UPS12-270 - Specifications
Cells Per Unit	Voltage Per Unit	Weight	Electrolyte	Maximum Discharge Current	Short Circuit Current	Ohms Imped. 60 Hz.
6	12.84	57 lbs. 26 kg.	Absorbed H2SO4 SG = 1.300	800 Amps	3600 Amps @ 0.1 sec.	0.0040 Ohms
Capacity			282 watts per cell at the 15 minute rate to 1.67 volts per cell at 77°F (25°C).
			75 Ah @ 20 hr. rate to 1.75 volts per cell @ 77°F (25°C).
			66 Ah @ 10 hr. rate to 1.80 volts per cell @ 20°C (68°F).
Operating Temperature Range			Discharge; -40°F (-40°C) to +160°F (71°C).		Charge; -10°F (-23°C) to +140°F (60°C). (with temperature compensation)
Nominal Operating Temperature Range			+74°F (-23°C) to +80°F (27°C).
Float Charging Voltage			13.5 to 13.8 VDC/ unit Average at 77°F (25°C).
Recommended Maximum Charging Current Limit			C/5 amperes (15 amperes @ 100% depth of discharge) @ 20 hour rate
Maximum AC Ripple (Charger)			0.5% Rms or 1.5% of float charge voltage recommended for best results.
			Maximum voltage allowed = 1.4% RMS (4% P-P).
			Maximum current allowed = 3.75 amperes RMS (C/20).
Self Discharge			Dynasty UPS batteries may be stored for up to 6 months at 77°F (25°C) and then a freshening charge is required. For higher temperatures the time interval will be shorter.
Accessories			Inter unit connectors, racks and cabinet systems are available.
Terminal			"L" terminal with 0.28" clearance hole to accept 0.25" (6mm) bolt.
Terminal Hardware Initial Torque			40 in.-lbs. (4.5 N-m).
Terminal Hardware Annual Retorque			32 in.-lbs. (3.48 N-m).

< Back to the UPS Battery main page