Battery Types:   Automotive   Chargers   Commercial   Marine   Motive Power   Motorcycle   Security   Stationary   TelcomBatteries   UPS Batteries

Installation and maintenance programs are available with custom cabling, racking or cabinets along with chargers, inverters and power boards.

Electro Battery is the complete source
for all your battery needs!

230 West Parkway US · Pompton Plains, NJ 07444
Phone: 973-835-3334. Fax: 973-835-2332
email address: info@electrobattery.com

TEL 12-30/SLC
Valve Regulated Lead Acid Battery
for communications standby power applications

FEATURES

• Flame-arresting one-way pressure-relief vent for safety and long life.
• Thermally welded case-to-cover bond to ensure a leak-proof seal.
• Flame-retardant polypropylene case and cover compliant with UL94 V-0 with an Oxygen Limiting Index of greater than 28.
• Absorbent Glass Mat (AGM) technology for efficient gas recombination 99% plus.
• Thick positive plate design for maximum service float life – 10 year design life.
• Complies with UL1778, 924, 1989 and 94 V-O.
• UL-recognized component.
• Can be used in any orientation. Upright, side or end mounting recommended.
• Low-profile terminals with threaded copper alloy inserts for reduced height, reduced maintenance and increased safety.
• Multicell design for ease of installation and maintenance.
• Not restricted for air transport – Complies with IATA/ICAO Special Provision A67.
• Not restricted for surface transport – classified as non-hazardous material as related to DOT-CFR Title 49 parts 171-189.
• Not restricted for water transport – classified as non-hazardous material per IMDG Amendment 27.
• Includes AWG #10 insulated wire harness and amp connector.

TEL12-30/SLC - Specifications
Cells Per Unit	Voltage Per Unit	Weight	Electrolyte			Maximum Discharge Current	Short Circuit Current	Ohms Imped. 60 Hz
6	12.84	27 lbs. 12 kg.	Absorbed H2SO4 SG= 1.300			11 Amps*	2150 Amps @ 0.1 sec.	0.0100 Ohms
Capacity			30.5 Ah @ 8 hour rate to 1.75 volts per cell @ 77° F (25° C) 29.1 Ah @ 10 hour rate to 1.80 volts per cell @ 20° C (68° F)
Operating Temperature Range			Discharge; -40° F ( -40° C to +160° F (71° C)				Charge; -10° F (-23° C) to +140° F (60° C) (with temperature compensation)
Nominal Operating Temperature Range			+74° F (23°C) to +80° F (27° C)
Float Charging Voltage			13.5 to 13.8 VDC/unit Average @ 77° F (25° C)
Recommended Maximum Charging Current Limit			C/5 amperes (5.8 amps @ 100% depth of discharge)
Maximum AC Ripple (Charger)			0.5% RMS or 1.5% P-P of float charge voltage recommended for best results. Maximum voltage allowed = 4% P-P Maximum current allowed = 1.65 amperes RMS (C/20)
Self Discharge			Dynasty Telecom batteries may be stored for up to 6 months at 77°F (25° C) and then a freshening charge is required. For higher temperatures the time interval will be shorter.
Accessories			Inter unit connectors, racks and cabinet systems available.
Terminal			Threaded copper alloy insert terminal to accept 10-32 UNC bolt.
Terminal Hardware Initial Torque			25 in.-lbs. (2.8 N-m)

*Due to Amp Plug P/N 350777-1 limitations on Cable P/N 32564.

Note:

Batteries to be mounted with 0.5 in. spacing minimum and free ventilation. Above ratings do not include cable harness. Specifications subject to change without notification.

Telecom Battery Links:

Specialty Lines Odyssey Dynasty GS Battery HAZE Battery SAFT Battery

 

 

We also offer our customers, depending on their needs, different kinds of battery junk removal programs utilizing EPA approved disposal centers and/or smelters.